How to use Pear Flower 2? Full guide for New PearFlower 2 Remote Shock Anal Plug.

The New PearFlower 2 Remote Shock Anal Plug is made from food-grade silicone and ABS, with a 304 stainless steel hinge. The net weight is 175 g. Main accessories include the main plug, user manual, charging cable, and physical key. The battery capacity is 300 mAh, the charging specification is 5V/1A, and the charging time is about 2 hours. The operating power is less than 10 W. The product has an IPX7 waterproof rating and supports approximately 1 hour of continuous working time.

The product diagram identifies the main functional parts of the PearFlower 2. The switch button is located on the top control section. The physical keyhole is on the side of the main body and is used with the included physical key. The shocking point is located near the upper plug section, while the vibration point is located near the lower insertable section of the product.

To use the app, scan the QR code in the manual to download the application, which is compatible with both Android and iOS systems. After completing registration and logging in, press the switch button on the device. Long-press the switch button until the blue light stays on, then release it. A blinking green light indicates that the device has started successfully.

Open the app and tap the plus “+” icon in the bottom-right corner of the screen. Follow the on-screen steps and choose the device you want to add. After the device has been added successfully, choose your role in the app according to the available options.

Follow the steps in the app to add and connect the device before wearing it. After locking the product so that it contracts to its minimum size, insert it into the body carefully. Once inserted, use the app to expand the product to a comfortable position, then lock it again. Use only as comfortable and stop immediately if pain or discomfort occurs.

After the device is connected, the app can be used to control the product. You may select preset modes or use the drawing-pad mode for operation. After the wearer connects the device, the owner can also perform remote control through the app, including shock and vibration functions depending on permissions and selected mode.

The app includes an AI interaction feature. Select an AI character, bind it to the device, and then chat with the AI. During conversation, the AI interaction may trigger the device’s electric shock or vibration function according to the selected settings and device connection status.

To charge the product, connect the charging cable to the charging port. When charging is in progress, a solid red light indicates that the device is charging. When the product is fully charged, a solid green light indicates a full charge. Use a 5V/1A charging source and allow approximately 2 hours for a full charge.

Clean the product thoroughly after each use and avoid contact with sharp objects. This product is not intended for medical use. Discontinue use immediately if you experience anal swelling, congestion, severe pain, or other concerning symptoms. Do not place the product near high temperatures or open flames. For hygiene purposes, this is a personal-use item and should not be shared or exchanged with others. Protect the product from strong impacts and do not expose it to prolonged sunlight. Do not wear the product continuously for more than 4 hours. A feeling of discomfort or incontinence after insertion may occur, but use the product with caution. The manufacturer is not liable for physical discomfort or injury caused by improper use.